IMX500 CM5 AI Camera Kit

Device List:

---

• POE Switch: 1 unit (This item can also be replaced with a network switch & a USB-typeC power supply)
• Arducam IMX500 All-in-One Device: 1 unit
• Laptop (Windows, with Ethernet port or USB Ethernet adapter): 1 unit
• Ethernet Cables: 2 units

---

Power supply options:

• Powered by PoE Switch

• Powered by USB Type-C Power Supply

---

Device Connection(Access to the external network):

1. Connect IMX500 AI Device to POE switch using Ethernet cable
   → IMX500 network indicator light will illuminate after ~15 seconds
   

2. Connection Diagram → Connect the Router to POE switch using Ethernet cable
   

Device Connection(Use host networking):

1. Connect IMX500 AI Device to POE switch using Ethernet cable
   → IMX500 network indicator light will illuminate after ~15 seconds
   

2. Connection Diagram
   → Connect the host computer to POE switch using Ethernet cable
   

3. Shared Network Configuration
   → Please refer to the following doc for the shared network configuration tutorial:
   Shared Network Configuration

---

Obtain Device IP Address:

Recommended Methods:

Method 1: Install Arducam_Discovery: Arducam Discovery Tool

Method 2: Connect via USB: USB Serial Device Login Tool

---

VNC Viewer Setup:

1. Download:
   VNC Viewer Official Link
2. Install:
   2.1. Double-click VNC-Viewer → OK → Next
   2.2. Accept terms → Next → Next
   2.3. Click Install → Finish
   
3. Launch:
   Start Menu → Search "vnc" → Open RealVNC Viewer
   

---

Connect to IMX500:

• Enter scanned IP 192.168.xxx.xxx → Press Enter

• Enter credentials:

Password

Username: pi
Password: raspberrypi

• Click OK

---

Run Demo:

# After successful connection:
cd imx500_demo  # Navigate to demo directory
./object_detection.sh  # Execute detection script → Camera activates