Skip to content

IMX462

Introduction

Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Using Arducam Pivariety camera modules, users can get better performance and a wider variety of camera, lens options. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver and camera modules (V1/V2/HQ). Now Arducam made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Auto Gain Control, Lens Shading Correction, etc.

This B0333 is a new member of the Arducam Pivariety series, which adopts a 1/2.7Inch 2MP STARVIS sensor IMX462, assembled with a wide aperture M16 lens, so as to can get much more decent image quality than the Official cameras in low light conditions.

Image Sensor

Image Sensor 2MP IMX462
Max. Resolution 1920H×1080V
Pixel Size 2.9μm(H)×2.9μm(V)
Optical Format 1/2.8”
Lens Spec Mount: M16 Focal length: 4mm±5%, F.NO: 0.95±5%, FOV: 92.23deg(H)
Minimum Illumination 0.01Lux
IR Sensitivity Integral IR filter, visible light only
Frame Rate Adjustable, 1080p@5-60fps
Sensor Output Format RAW10
ISP Output Format The output image format of JPG, YUV420, RAW, DNG The output video format of MJPEG, H.264
Interface Type 2-Lane MIPI
Camera Board Size 38mm×38mm

Detailed parameters

Product Image SKU Pin/Connect type Features Lens Type Field of View(HxV) Focus Type IR Sensitivity
B0333 22/TOP Ultra Low Light M16 92°(H) x 51.7°(V) Manual Focus without IR cut Filter
B0444 22/TOP Wide Angle Ultra Low Light M12 141.4°(H) x 81.7°(V) Manual Focus Integrated IR-cut Filter

Next

Quick Start